Hybrid Stepping Motor Geard Type (GT Series)

Geared Hybrid Stepping Motor (GT Series)

Minebea Motor's GT geared series is a unit of stepping motor with Minebea's ball bearings and low-backlash gearbox. GT geared motors are available with five different gear ratios: 1:3.6, 1:7.2, 1:10, 1:20, and 1:30.

Catalogue
[ 259 KB ]

Hybrid Stepping Motor Geard Type (GT Series)

Frame size 60mm

Model	Rated Current	Resis- tance	Step Angle	Gear Ratio	Permis- sible Torque	Permis- sible Speed Range	Backlash	Mass	Torque Charac- teristics	Outline
Model	( A )	( ohms )	( deg )	( 1 : X )	( Nm )	( r/min)	( min )	( g )	Torque Charac- teristics	Outline
GT0036-23M201	0.9	5.8	0.5	1 : 3.6	1.25	0 ~ 500	35	820	[ 42.1 KB ]	[ 120 KB ]
GT0072-23M201			0.25	1 : 7.2	2.5	0 ~ 250	15	820	[ 42.2 KB ]
GT0100-23M201			0.18	1 : 10	3.0	0 ~ 180	15	820	[ 42.2 KB ]
GT0200-23M201			0.09	1 : 20	3.5	0 ~ 90	10	850	[ 42.2 KB ]
GT0300-23M201			0.06	1 : 30	4.0	0 ~ 60	10	850	[ 110 KB ]

* Drive sequence: Unipolar
* Leadwires will be supplied with the motor
* Direction of rotation of the motor and that of the gear output shaft are the same for the gear ratios 1:3.6, 1:7.2 and 1:10. It is the opposite for 1:20 and 1:30 gear ratio.