eMinebea | Minebea Motor

Application

Reference Characteristics

Motor Size	PM42M-048
Number of Steps per Rotation	48(7.5/Step)
Drive Method	2-2 PHASE
Drive Circuit	UNIPOLAR CONST. VOLT.	BIPOLAR CHOPPER
Drive Voltage	24[V]	24[V]
Current/Phase		500[mA]
Coil Resistance/Phase	80[]	6[]
Drive IC	2SC3346	UDN2916B-V
Magnet Material	Ferrite plastic magnet (MSPL) Polar anisotropy ferrite sintered magnet (MS50) Nd-Fe-B bonded magnet (MS70)
Insulation Resistance	100M[] MIN
Dielectric Strength	AC 500[V] 1[min]
Class of Insulation	CLASS E
Operating Temp.	-10[] 50[]
Storage Temp.	-30[] 80[]
Operating Hum.	20[%] RH 90[%] RH

PM42M-048 UNI-CONST. VOLT. (at 24[V],80[])
	Torque Characteristics
	Supply current (at Circuit terminal)
PM42M-048 BI-CHOPPER (at 24[V],6[],500[mA])
	Torque Characteristics
	Supply current (at Circuit terminal)
	These torque values are reference only. Heat radiation conditions and temperature rise effect by duty are different on each equipment, therefore please select motors after considering the heat conditions in the actual equipment.
External View of Motor with Dimensions
	If you would like to know this Dimensions(D,S,W,), Please see Standerd Dimensions in our Home Page.
Standard Dimensions