Skip to main content

Product Category

Home ... Product Category... Bearings... Rod end bearings... HRT-E

HRT-E

  • Self Lubricating
  • 3 Piece Rod End
  • Bearing - Male

Material

  HRT-E HRT-ECR
BODY Chromium-Molybdenum Steel
Zinc Plated
SUS630 Stainless Steel
Passivated
RACE 410 Stainless Steel /
Heat Treated
410 Stainless Steel /
Heat Treated
BALL 440C Stainless Steel /
Heat Treated
440C Stainless Steel /
Heat Treated
LINER TFE TFE

Overall View

Overall View:HRT-E

Part Number

Image:Part Number

Dimension

Dimensions in mm

MINEBEA
PART
No.
øB
H7
øD
±0.50
W
0
-0.13
H
±0.13
F
±0.5
TH
JIS CL2
L
±0.7
α
DEG
øO
(REF)
SøDB
(REF)
HRT5E 5 20.5 11 8.75 39.5 M5×0.8 22 15 7.8 13.49
HRT6E 6 M6×1.0
HRT8E 8 23 8.25 46 M8×1.25 29 14 10.9 15.48
HRT10E 10 26 12.5 10.75 47 M10×1.5 8 12.2 17.46
HRT12E 12 34 16 13.25 62 M12×1.75 37 10 15.4 22.22
HRT14E 14 36 17 14.25 64 M14×2.0 38 8 18.9 25.4
HRT15E 15 38 18 65 11 19 26.19
HRT16E 16 39 19 15.25 66.5 M16×2.0 39.5 10 19.2 26.99
HRT18E 18 43 20 16.3 79.5 M18×1.5 46 10 20.4 28.58
HRT20E 20 45 22 83 M20×1.5 50 13 22.9 31.75
HRT22E 22 52 19.3 86 M22×1.5 51 6 27.1 34.92
HRT25E 25 70 35 25.3 105 M24×2.0 59 15 32.3 47.62
HRT30E 30 78 37 26.3 120 M30×2.0 65 14 40.4 54.77

Dimensions in mm

MINEBEA
PART
No.
No Load Rotational Breakaway Torque
N・m
Static Limit load*2
kN
Static Ultimate Load*2
kN
Fatigue Load*2
kN
Approx. Weight
g
Standerd Type Radial Axial*1
HRT5E 0.06~0.68
{0.6~6.9kgf・cm}
10.29 5.09 12.84 2.1 35
HRT6E 14.51 18.14 2.99
HRT8E 0.12~1.13
{1.2~11.5kgf・cm}
26.77 5.29 33.44 5.54 40
HRT10E 37.65 6.76 47.07 7.84 65
HRT12E 62.46 8.33 78.06 12.94 126
HRT14E 82.96 9.02 103.65 17.25 140
HRT15E 100.71 9.7 125.81 20.98 165
HRT16E 195
HRT18E 120.62 12.16 150.72 25.1 250
HRT20E 121.3 12.84 151.61 25.2 290
HRT22E 0.23~1.80
{2.3~18.4kgf・cm}
156.21 15.1 195.25 32.55 450
HRT25E 300.08 20.88 375.1 62.56 1150
HRT30E 271.93 24.81 339.89 56.68 1800

Notes

*1 Axial load indicates either the smaller value of static load or proof load.
*2 Special specification can bare higher fatigue load.

1. Teflon® liner permanently bonded to race I.D.
2. Made to order only.
3. No load rotational breakaway:Low torque type: All size: 0.02N・mMAX (Radial clearance 0.05mmMAX)

*Please consult Minebea for availability of bearings in this series.
*Teflon® is a Du Pont registered trademark.

Feature of a Product

  • Suitable for High load application.
  • Self-lubricating.

Consist of a spherical bearing staked into the Rod End body. They provide high strength, as main body material is chrome molybdenum steel (hardness 35HRC, tensile strength 980N/mm2{100kgf/mm2}). Material selection of spherical race is depending on applications and therefore, 3piece Rod End can bear sever requirements.

Associated Data

Go back to of this page

Home ... Product Category... Bearings... Rod end bearings... HRT-E